Installation/Mechanical Connection - SICK PAC50 Notice D'instruction

Operating Instructions
Always red (no color change, "DISC" function: RED)
•
Always green (no color change, "DISC" function: GRN)
•
Energy saving mode. The display is switched off. The display is activated for 10 seconds when one of the
•
pushbuttons is pressed ("DISC" function: OFF)
4.4 IO-Link (if available)
A description of the IO-Link functions for the PAC50 and the accompanying IODD (IO-Link Device Description)
file can be downloaded from www.sick.com.
4.5 Protection of the environment
The PAC50 has been designed to minimize its impact on the environment. It consumes only a minimum
of energy. At work, always act in an environmentally responsible manner. For this reason, please note the
following information on disposal. The PAC50 display can be switched off (DISC function) to reduce power
consumption by the device.
4.5.1 Disposal after final decommissioning
Always dispose of unusable or irreparable devices in accordance with the applicable specific national waste
disposal regulations. SICK AG does not currently take back devices that are unusable or irreparable.

5 Installation/Mechanical connection

Ensure that there is no mechanical load on the pressure switch during installation. Please
observe the ambient conditions specified in Section 9 (Technical data). The pressure transmitter
must not be exposed to condensation.
5 8 O p e r a t i n g I n s t r u c t i o n s | S I C K
5 Installation/Mechanical connection
8017612/YSZ4/2016-02-09 | PAC50
Subject to change without notice
PAC50