SICK PAC50 Notice D'instruction page 57

Operating Instructions
A
B
C1 D1 E1
C2 E2
D2
Figure 6: Display areas
A
Display mode Indication of the
applied pressure
Programming mode Value of the
selected parameter
Table 2: Indicators in display areas
Once the set switching points (SP1/2, RP1/2, FH1/2, or FL1/2) have been reached, the color of the respec-
tive switching point display areas changes between green and red.
The color change can be set using the "DISC" function:
Red if the switching point is not reached or undershot, or if the applied pressure is within the defined
•
window, and green if the switching point is exceeded or if the applied pressure is outside the window
("DISC" function: OD)
Red if the switching point is exceeded or if the applied pressure is outside the defined window, and green
•
if the switching point is not reached or undershot, or if the applied pressure is within the window ("DISC"
function: DU)
8017612/YSZ4/2016-02-09 | PAC50
Subject to change without notice
4 Product description
Display areas
B C1/C2
Key symbol if the Switching thresh-
keypad is locked, olds set
unit of pressure set
Selected parameter Additional infor-
mation
D1/D2 E1/E2
Output state for Set value of
switching output switching thresholds
1/2
Output state for Set value of
switching output switching thresholds
1/2
O p e r a t i n g I n s t r u c t i o n s | S I C K
PAC50
5 7