SICK PAC50 Notice D'instruction page 70

Operating Instructions
7 0 O p e r a t i n g I n s t r u c t i o n s | S I C K
3 Transport, packaging, and storage
OU2 PARA
P-N PARA
OUA PARA
UNIT Unit
0SET YES/NO
DISM PARA
DISU Value
DISR YES/NO
Description
Switching function, switching output 2
(if second switching output is available):
Hysteresis function, normally open: HNO
Hysteresis function, normally closed: HNC
Window function, normally open: FNO
Window function, normally closed: FNC
Diagnostic function: DIA
Switching logic for switching outputs: pnp, npn, or push-pull
(applies for both switching outputs, if second switching output is
available. Q1 is always PNP for the IO-Link option)
(if analog output is available):
Output signal 4 to 20 mA: I
Inverted output signal 20 to 4 mA: IINV
Output signal: 0 to 10 V: U
Inverted output signal 10 to 0 V: UINV
Automatic detection depending on applied load (non-inverted
output signals): AUTO
Unit of pressure setting in the display
Zero offset correction, max. 5%
Indication of switching points/window limits in display areas C
and E: SPRP
Indication of LOW/HIGH values in display areas C and E: LoHi
Display update
Turns display indicator in the relevant display field upside down
electronically
8017612/YSZ4/2016-02-09 | PAC50
Subject to change without notice
PAC50