SICK PAC50 Notice D'instruction page 56

Operating Instructions
Display mode
<up/info> Brief press:
No function
Long press:
Displays the set parameters
• SP1/FH1
• RP1/FL1
• SP2/FH2 (if available)
• RP2/FL2 (if available)
• Analog output (if available)
• LOW
• HIGH
<down/menu> Brief press:
No function
Long press:
Switches to programming mode.
A password prompt appears if a password is set
(≠ 0000). If the correct password is entered, the
device switches to programming mode; otherwise,
it reverts back to display mode.
<enter> No function
No function
+
Table 1: Pushbutton functions
4.3 Display with color switching
The PAC50 has a backlit LCD display. The display is divided into different areas (see Figure 6 and Table 2).
5 6 O p e r a t i n g I n s t r u c t i o n s | S I C K
4 Product description
Programming mode
Brief press:
• Menu up
• Increases/moves parameter value up
Long press:
• Menu up
• Increases/moves parameter value up
Brief press:
• Menu down
• Reduces/moves parameter value down
Long press:
• Menu down
• Reduces/moves parameter value down
Brief press:
• Selects menu entry
• Confirms the set parameter values
Simultaneous press:
• Returns to display mode
8017612/YSZ4/2016-02-09 | PAC50
Subject to change without notice
PAC50