Models And Configurations; Handling And Transportation - Sime ECOMAXI 260 ErP Manuel D'installation, D'utilisation Et D'entretien

Installation, use and maintenance manual
1.5

Models and configurations

The heat pump is available in two models,
each with heat output of 1.9 kW and 260 l
capacity.
Model Configuration description
260 Air-source heat pump for
domestic hot water production.
Air-source heat pump for
260 S domestic hot water production,
set up for use with a solar panel
system.

2 Handling and transportation

The appliance is supplied in a cardboard
box (*). It is fixed to a pallet with three
screws.
For unloading, use a forklift or pallet jack
that supports up to
250 kg.
The packaged
appliance can be
rested horizontally
on its rear side to
make it easier to
unscrew the
screws.
The appliance must
be unpacked
carefully so as not
to damage the
casing if using knives or cutters to open the
cardboard packaging.
After the packaging has been removed,
check that the unit is in one piece. If in
doubt, do not use the appliance and
contact an authorised technician.
Before disposing of the packaging, in line
with the environmental
regulations in force, ensure that all of the
44
accessories supplied have been removed
from the packaging.
(*) Note: the type of packaging may vary at
the manufacturer's discretion.
While the appliance is not in use and
waiting to be commissioned, it should be
positioned in a place that is sheltered from
the weather.
Correct
transportation:
protection
DOCUMENT 6328408
WARNING: all
components (staples, cardboard,
etc.) should not be left within the
reach of children as they are
dangerous.
positions for handling
packaging
and