Installation, use and maintenance manual
5.2
Air ventilation connections
Example A
Example B
The heat pump requires adequate air
ventilation, in addition to the clearance
spaces specified under 5.1.
Create a specific air duct as shown in the
figure below (Fig. 3).
Outside
Fig. 7 – Example of air outlet connection
The room where the appliance is installed
should be suitably ventilated. An alternative
solution is shown in the figures below (Figs 4
and 5). This includes a second duct that
takes air from the outside, inside of from
inside the room.
Fig. 5 – Example of dual duct connection on
rear outputs (optional)
Install the air duct making sure that it:
Fig. 8 – Example of dual duct connection
52
DOCUMENT 6328408