Advanced Setting Menu; Advanced Setting Menu (Zoom); Advanced Setting Menu (Focus) - Videotec Ulisse Compact Manuel D'instructions

8.1.9.7 Advanced Setting Menu

This menu is used to configure the SONY module.
1. Zoom: Allows access to the Zoom submenu.
ADVANCED
------------------------
1>ZOOM
2 FOCUS
3 EXPOSURE
4 INFRARED
5 WHITE BALANCE
6 OTHER
Fig. 52

8.1.9.8 Advanced Setting Menu (Zoom)

1. Zoom Speed: Sets the speed of the zoom. The
speed ranges between 0 (minimum speed) and
7 (maximum speed).
2. Digital Zoom: Enables the digital zoom.
ZOOM
------------------------
1>ZOOM SPEED
2 DIGITAL ZOOM
Fig. 53
MNVCUCT_1511_EN
>
>
>
>
>
>
: 7
: N

8.1.9.9 Advanced Setting Menu (Focus)

It allows you to configure the following parameters:
1. Focus Speed: Sets the speed of the Focus. The
speed ranges between 0 (minimum speed) and
7 (maximum speed).
Autofocus: Enables or disables the autofocus.
2.
When on, it is to automatically load Autofocus
at any positioning or movement of the zoom,
depending on the selected operating mode.
Autofocus Type: Sets the type of Autofocus. The
3.
possible values are:
• Normal: Autofocus is always enabled.
• Interval: The autofocus function is loaded at
regular intervals. The Interval is set every 5
seconds.
• Trigger: Autofocus is loaded at every PTZ
movement. This is the recommended
solution.
4. Sensitivity: Sets the level of sensitivity. The
possible values are:
• Normal: Focusing at the highest possible
speed. This is the recommended solution.
• Low: Slowed-down focusing. It is useful in
case of dim lighting as it makes the image
more stable.
FOCUS
------------------------
1>FOCUS SPEED
2 AUTOFOCUS
3 AUTOFOCUS TYPE:TRIGGER
4 SENSITIVITY
Fig. 54
: 2
: N
: NORMAL
31