Stopping The Mounting Process; Removing The Top Closure - Struers ProntoPress-20 Mode D'emploi

Stopping the Mounting Process

Removing the Top Closure

20
ProntoPress-20
Instruction Manual
The machine automatically stops when the cooling time has
elapsed. The machine can be stopped at any time during the
mounting process by pressing STOP
If you have stopped the machine during the mounting process:
Cool the mounting cylinder a minimum 2 min before opening, after a heating
period. Please note that the mount possibly will be destroyed.
When it is indicated in the display, that the mounting process is
finished:
Turn the top closure counter-clockwise until released from
thread.
O
Press RAM UP
Turn the top closure to one side to give access to remove the
specimen.
o
to raise the lower ram to its upper limit.
.