Setting The Force Or Pressure Mode - Struers ProntoPress-20 Mode D'emploi

Setting the Force or
Pressure Mode
26
ProntoPress-20
Instruction Manual
FORCE mode is the common function mode for a mounting press,
setting the actual force on the ram.
In PRESSURE mode, you set the absolute pressure independently
of the cylinder diameter.
mO
Press MENU UP/DOWN
mN select the Force or Pressure
D
CONFIGURATION
Cylinder Diameter:
Temperature Unit:
Force or Pressure:
D
e
Press ENTER
or Pressure Menu.
D
FORCE OR PRESSURE
FORCE
PRESSURE
D
mO
Press MENU UP/DOWN
mN select the mode you prefer.
D
e
Press ENTER
mON
to
L:25 mm R: 50 mm
CELSIUS
FORCE Unit: kN
e
to activate the Force
mON
to
e
to accept the mode.