Select A Mounting Method; Method Edit - Struers ProntoPress-20 Mode D'emploi

Method Edit

16
ProntoPress-20
Instruction Manual
Select a Mounting Method. (The Struers methods in Group 1 are
protected against editing).
Grp: 2 Method: 3
HEAT: Time: 7:00
COOLING: Rate:
F1:SELECT PREHEATING
D
mO Move the cursor, to the desired para-
meter to be changed, e.g. Heating Time.
mN
D
Grp: 2 Method: 3
HEAT: Time: 7:00
COOLING: Rate:
F1:SELECT PREHEATING
D
e
Press ENTER
the parameter marked with [ ].
D
Grp: 2 Method: 3
HEAT: Time: [7:00]
COOLING: Rate:
F1:SELECT PREHEATING
D
mO
Press MENU UP/DOWN
mN increase/decrease the value.
D
Grp: 2 Method: 3
HEAT: Time: [6:30]
COOLING: Rate:
F1:SELECT PREHEATING
D
e
Press ENTER
D
Grp: 2 Method: 3
HEAT: Time: 6:30
COOLING: Rate:
F1:SELECT PREHEATING
Resin:MultiFast
T: 180°C F: 20 kN
HIGH Time: 3:00
Resin:MultiFast
T: 180°C F: 20 kN
HIGH Time: 3:00
e
, to allow editing of
Resin:MultiFast
T: 180°C F: 20 kN
HIGH Time: 3:00
mON
to
Resin:MultiFast
T: 180°C F: 20 kN
HIGH Time: 3:00
e
to accept the new value.
Resin:MultiFast
T: 180°C F: 20 kN
HIGH Time: 3:00
F4:SAVE