Struers ProntoPress-20 Mode D'emploi page 21

Select a Mounting Method
ProntoPress-20
Instruction Manual
The display should show the Method Group Menu:
SELECT METHOD GROUP
1. STRUERS
3. GROUP NUMBER 3 4.
F1:CONFIG. F3:MAN. FUNC.
If the heading in the display is different:
Press Esc, until a display with the above heading
Esc
appears.
D
mO
Press MENU UP/DOWN
mN Method Group, e.g. GROUP NUMBER 2.
D
e
Press ENTER
D
Group:GROUP NUMBER 2
1. METHOD 1
3. METHOD 3
F1:COPY
D
mO
Press MENU UP/DOWN
mN desired Method, e.g. METHOD 3.
D
Group:GROUP NUMBER 2
1. METHOD 1
3. METHOD 3
F1:COPY
D
e
Press ENTER
D
Grp: 2 Method: 3
HEAT: Time: 7:00
COOLING: Rate:
F1:SELECT PREHEATING
2. GROUP NUMBER 2
GROUP NUMBER 4
ON
until you reach the desired
e
, to accept the group.
SELECT METHOD
2.METHOD 2
4.EMPTY METHOD
F3:RESET F4:RENAME
ON
until you reach the
SELECT METHOD
2.METHOD 2
4.EMPTY METHOD
F3:RESET F4:RENAME
e
, to see the method.
Resin:MultiFast
T: 180°C F: 20 kN
HIGH Time: 3:00
15