Struers Discotom-60 Mode D'emploi page 60

Slide Bearings
56
Discotom-60 /-65
Instruction Manual
 Remove the stainless steel bands located over the guide shafts
(see illustration).
 Remove the 4 M6 set screws.
 Fill the holes with oil eg. Shell TELLUS oil S100.
Use approx. 25ml oil for each side or until the reservoirs are full.
A bottle with oil for lubricating the slide bearings is supplied with the
Discotom-60/ -65. When all the oil has been used, refill with eg. Shell
TELLUS oil S100.
If the oil in the reservoir appears milky;
this indicates that water has entered the oil reservoir.
Call a Struers Service Technician to clean the reservoir.
 Re-fit the screws and remount the stainless steel bands.
Important