Cooling Valve Positions - Struers Unitom-5 Mode D'emploi

Cooling Valve Positions

Location of Cooling Valve
for cooling/cleaning
10
Unitom-5
Instruction Manual
1
The cooling valve for
cooling/cleaning is
located in the back of the
COOLING
cutting chamber to the
VALVE
left.
Turn the knob counter-
clockwise to vertical
position for cooling of
cut-off wheel.
Turn the knob to regulate
the flow while flushing
the cutting chamber.
Turn the knob clockwise
to vertical position for
flushing the cutting
chamber with maximum
flow.