Struers Unitom-5 Mode D'emploi page 213

Automatic Cutting Table for Unitom-5
Instruction Manual
Automatic Cutting Table
Safety Precaution Sheet
To be read carefully
before use
1. The operator(s) should be fully instructed in the use of Unitom-5 and
the automatic cutting table according to the Instruction Manuals.
2. The automatic cutting table must only be installed by a qualified
technician.
3. The workpiece must be securely fixed in the quick-clamping device or
the like.
4. Do not touch anything inside the cutting chamber while positioning the
automatic cutting table.
The equipment is designed for use with consumables supplied by Struers. If subjected to misuse, improper
installation, alteration, neglect, accident or improper repair, Struers will accept no responsibility for
damage(s) to the user or the equipment.
Dismantling of any part of the equipment, during service or repair, should always be performed by a qualified
technician (electromechanical, electronic, mechanical, pneumatic, etc.).