Cold Start Button; Right Switch - Ducati 748R Manuel D'utilisation Et Entretien

Cold start button (fig. 8)
This device is on the throttle twistgrip. Push the button
(3) to enable control. In this way, the throttle control (4)
will lightly turn, thus increasing the engine rotation
speed. Use this device to start the engine from cold
(page 33).
Important
Move the button (3) back to rest position once the
engine is warm. Turn the throttle twistgrip (4) clockwise
(slow down). Never use this device when the engine is
warm.
4
Right switch (fig. 9)
1) Switch for ENGINE STOP, two positions:
position
position
Warning
This switch is mainly intended for use in emergency
cases when you need to stop the engine quickly. After
stopping the engine, return the switch to the
position to enable starting.
Important
Stopping the engine using switch (1) after riding
with the lights on and leaving the ignition key in the ON
position, may run the battery flat as the lights will remain
on.
2) Button
3
fig. 8
(RUN) = run.
(OFF) = stop.
= engine start
E
15