Left switch (fig. 18)
1) Dip switch, light dip switch, two positions:
- position
= low beam on;
- position
= high beam on.
2) Switch
= 3-position turn indicator:
- centre position = off;
- position
= left turn;
- position
= right turn.
To deactivate the turn indicator, press the control
level once it has returned to the centre.
3) Button
= warning horn.
4) Button
= flashing high beam.
5) Use this device (5) to start the engine from cold. It will
increase the engine idling speed after starting.
Lever positions:
A - (vertical) OFF;
B – fully open.
The lever can also be set to the intermediate position
to facilitate gradual warming of the engine.
Notes
Never use the cold start device when the engine is
warm or leave it open when riding.
1
4
2
Notes
When you operate devices (1), (2) and (4) the
corresponding function indicators light on the instrument
panel 14).
A
5
B
fig. 18
3
E
27