Display And Control Options - HBM PMX Manuel D'emploi

74

9.4 Display and control options

The start screen shows the modules (amplifiers) present in the device, with
current measured values, the status of the digital inputs/outputs and the bus
systems (if present), as well as the calculated channels.
Touch or click on one of the targets (
cursor turns into a hand (
dialog to change the setting.
calls the setting menu, from which you can reach all the dialogs by using
the tabular menu structure. There are additional submenus in all the menu
items for which a triangle (
you have selected a menu item, the menu path is displayed next to the sym-
bol for the setting menu.
If you change a setting,
initially only stored in the RAM. Touch or click on this symbol, to save the set-
ting, power failsafe in the flash EPROM.
Symbols and displays used
calls user administration.
calls the list of favorites. You can add any view to the list of favorites
while deleting
calls this Help.
The LED at the bottom left shows the status of the PMX:
Everything OK.
There is an error in one or more of the channels, but the PMX
keeps on working.
There is a critical error, measured values can no longer be recorded
or processed.
), or one of the places where the
), to change the relevant setting or to get to the
) shows in the bottom-right corner. As soon as
is displayed at the bottom right, as the setting is
Starting up
A3257−2.0 en/de/fr