Table des Matières
Publicité
Quick Start
If several PMX devices are available in the network, this selection box will
also appear:
Check the box for the required PMX
Click Setup
The Flash function allows the device to be identified by flashing all the device
LEDs.
5. Configure the system with the web server
− Assign the sensors
− Assign the units
− Set the filter
− Monitor maximum and minimum values
− Monitor limit values
− Set up virtual (calculated) channels
NOTE
Clicking on the floppy disk symbol
power failsafe.
A3257−2.0 en/de/fr
saves the settings/changes
83
Publicité
Chapitres
Table des Matières
Dépannage
