HBM PMX Manuel D'emploi page 12

12
PX878
 The PX878 input/output card has a total of eight digital inputs, eight di-
gital outputs and five analog voltage outputs. The PMX can be con-
trolled by this, as well as operated with a downstream control (PLC). All
real or calculated measurement signals can be freely assigned to the out-
puts.
PX01EC and PX01PN
 These interface cards can be optionally included in the PMX, enabling
operation of the PMX in an automation system via the interface formats

EtherCat or ProfiNet. Only one variant can be used in each case.
Connection technique
Transducers are connected to the amplifiers via plug terminals.
Plug terminals using push-in technology are available as standard, with a
screw-on system also available as an option. If required, both types can be
coded with the enclosed coding pins to prevent mix-ups.
TEDS (Plug&Measure)
PMX amplifiers support TEDS (Transducer Electronic Data Sheet). When the
PMX is activated, it automatically detects whether sensor with TEDS is
connected. The data are read out and the amplifier channel is parameterized
accordingly. This efficiently minimizes setup times and user error.
When the transducer is replaced in the activated state, the new TEDS is also
detected automatically but has to be activated manually.
PMX web server
An easy to operate web server that is specifically tailored to the PMX and is
suitable for the measurement cards, is integrated into the device for configura-
tion, data acquisition and visualization.
This gets you quickly to your measurement result, and you can visualize the
measured data, subsequently view them and export them in the most com-
monly used formats.
Product description
A3257−2.0 en/de/fr