HBM PMX Manuel D'emploi page 123

Commands
Parameter:
p1...p4
214
204
205
217
Note: This command can significantly increase the amount of data
to be calculated and transmitted.
For this reason PMX has an internal multi client software ar­
chitecture and catman is "only" one of these clients; the avail­
able signals (except gross) must be created at top level. Oth­
erwise these signals are not available.
Note: Response depends on SRB command.
MSS?
Syntax: MSS?(x)
Parameter: none
Response: list[ i ]: list[ j ]:...: list [ k ]
list [ x ]
Example: 214,204:214,205:217....
A3257−2.0 en/de/fr
Signal that is to be recorded
Gross, dynamic
Min value , virtual channel
Max value , virtual channel
Max - Min (peak-peak), virtual
channel
Measuring Signal Select Query
Output the measurement signal selection for the channels to be re-
corded
123