HBM PMX Manuel D'emploi page 138

138
Note:
On clearing, peak value stores (Min or Max) are set to the cur-
rent measured value. Peak-Peak is set to 0.0 . Peak-Peak
has its own Min/Max stores!
The peak value signals have to be created at top level para-
meterisation before. Otherwise they are not available.
Virtual subchannels (channel 9) do not support peak values.
Note: Response depends on SRB command.
HPV
Suspend/Enable peak value store updating
Syntax: HPVp1,p2(x)
Parameter: p1: peak value store 1 (Max), 2 (Min) or 3 (Peak-Peak)
p2=1: suspend updating
p2=0: enable updating (default)
Whenever you switch on, the status is set to "enable updating".
Virtual subchannels (channel 9) do not support peak values.
Note: Response depends on SRB command.
Hold Peak Value
Aktualisierungsstatus der Spitzenwertspeicher
Commmands
A3257−2.0 en/de/fr