Scope Of Supply; Accessories - HBM PMX Manuel D'emploi

20

4.2 Scope of supply

1 PMX basic device, with a wall mounting kit (1 wall bracket, 4 screws,
For each measurement card : a mating connector for each channel
(4 connectors are enclosed for each measurement card, complete with
Pre-assembled DIN rail mounting (2 units, packed in film cushion
packaging with the mounting material in an Etimex bag)
4 M5x10 close tolerance screws, 4 spring washers)
PMX system CD with operating manual and data sheet
Safety instructions and quick start guide

4.3 Accessories

Blue blanking plate (for communication module)
White blanking plate (for communication module)
DIN rail mounting (2 units, packed in film cushion packaging with
the mounting material in an Etimex bag)
4 M5x10 close tolerance screws, 4 spring washers)
1 set plug-in screw terminals (push-in) for PMX
plug-in cards (4 pieces, incl. coding plug and labeling
sheet)
1 set screw terminals (screw in) for PMX plug-in cards (4
pieces, incl. coding plug and labeling sheet)
Screw-in screw terminals for PMX voltage supply (incl.
coding plug and labeling sheet)
Ethernet crossover cable for direct connection of devices to a PC or
notebook; length: 2 m, type: CAT5+
Input : 90 V ... 240 V AC, 1,5 m cable
Output : 24 V DC max. 1,25 A, 2 m cable with ODU connector
In general, the mating connectors are always included for all cards (PX401,
PX455, PX878).
When ordering a PMX via the K−MAT structure, the delivery includes DIN rail
mounting and wall mounting elements.
4 washers)
with CAN connection
without CAN connection
coding pins)
Phoenix plug terminals
AC / DC power supply
Model overview
Order no.
1−WGX001
1−WGX002
1−CON−S1008
1−RAILCLIP
Order no.
1−PX001
1−PX002
1−RAILCLIP
1−CON−S1008
1−CON−S1009
1−CON−S1010
1−KAB239−2
1−NTX001
A3257−2.0 en/de/fr