HBM PMX Manuel D'emploi page 450

114
SPS
This command sets the subchannel selection mask for the settings. The mo-
dules to be set should already be selected with PCS.
Syntax: SPS p1,.., p128 (x)
Parameter: p1,.., p128 1,.., 128 subchannel selection
SPS 0 (x) selects all the subchannels of a module
Syntax: SPS? p1(x)
Returns 1,2,3:3,4:1,2,3,4,5 for example. Channels(slots/boards) are sepa-
rated with ":"
Note: Response depends on SRB command.
SPS?
Syntax: SPS? p1(x)
Parameter: p1:
0 existing subchannels
1 selected subchannels
Response: q1,.., q128 list of the existing or active channels
UCC
Input comment
Syntax: UCCp1(x)
Parameter: p1: any string "_____", max. 45 characters
Note: The HBM setup Assistant for the MGCplus distinguishes
between a channel name and comment which are both stored
in the UCC string. The channel name and comment are sep-
arated by a ";"
Subchannel Programming Select
Output channel selection for set-up commands
Subchannel Programming Select Query
output mode
User Channel Comment
Jeu de commandes
A3257−2.0 en/de/fr