HBM PMX Manuel D'emploi page 27

27
Mounting
Hook the PMX device into the DIN rail (4)
2
1
4
3
Fig. 6.2: Four positional options for support rail mounting
Important
HBM recommends using a DIN support rail (DIN EN 60715), 15 mm in height.
When using a smaller support rail (7.5 mm high), it should be packed, to make
it easy to hook/unhook the PMX device.
The 7.5 mm support rail can only be used in the top two positions (1 and 2).
Attach the support rail mounting (rail clip) to the DIN rail
Allen screw
2.5 mm
A3257−2.0 en/de/fr