Pole Pruner; Parts List; Safety Operation - Ribimex Ribiland PR4EN1T/2 Manuel D'instructions Et D'utilisation

POLE PRUNER

I. PARTS LIST
1. Guide bar
2. Chain
3. Oil tank
4. Oil Cap
5. Gear case
6. Chain cover
7. Tube
II. CHARACTERISTICS
Chain
Guide bar
Cutting length
Oil tank
Dry weight with pruner attachment
III. Special Safety Instructions
!
CAUTION
1. Always maintain this pole pruner according to the this owner's manual and follow the
recommended scheduled maintenance
2. Never modify or disable any of the pole pruner's safety devices.
3. Always use genuine parts and accessories when repairing or maintaining this machine.
4. Do not make unauthorized modifications or substitutions to the guide bar or chain.
5. Never allow the engine to run at high RPM without a load. Doing so could damage the engine.
6. When transporting the pruner in a vehicle, tie it down securely to prevent damage and fuel
spillage.
7. Always stop the engine and allow it to cool before refueling. Avoid overfilling and wipe off any
fuel that may have spilled.
8. Never place flammable material close to the engine muffler and never run the engine without the
spark arrestor screen in place.
9. Always clear your work area of trash or hidden debris to help ensure good footing. 10. Plan an
escape route to avoid falling branches.
11. Keep the saw chain sharp and properly adjusted.
12. Keep the pruner as clean as possible. Keep it free of loose vegetation, mud, etc.

3.1 Safety Operation

12" (300mm)
12" (300mm)
300mm
200 cm
7.4kg approx.
The pole pruner is not insulated against electrical shock!
• Approaching or contacting electrical lines with the pole
pruner could cause death or serious injury.
• Keep the pole pruner at least 10 meters away from electrical
lines or branches that contact electrical lines
Fig.PP1
3
Page 53 / 99