Angelo Po FX61 G3 Manuel D'installation Et D'opération page 72

Section 5
Operation
7. Press the button. >>>
To modify the cooking variables, proceed as
described in point "Manual cooking" mode" (see
page 40).
The cooking mode, the chamber temperature and
the time/core temperature can be quickly changed
by using the knob.
During cooking, except for C3 cooking modes;
• press the knob once and turn it to change the
temperature of the cooking chamber; press the
knob to confi rm the change.
• press the knob twice and turn it to change the
cooking time or the core temperature; press the
knob to confi rm the change.
• press the knob three times and turn it to change
the cooking mode (convection, steam or mixed);
press the knob to confi rm the change.
Turn the knob to change the % of moisture (mixed)
or the % of the outlet opening (convection).
The cooking cycle stops automatically at the end of
the set time or when the "product core probe" detects
the set temperature. At the end of the cooking cycle
a beeper sounds and the light inside the cooking
chamber goes out.
Press the button (E) or open the door to stop the
cooking cycle before the set time. The appliance
remains powered up. To turn off the electricity supply,
press the button (G).
72 Combination Oven Installation and Operation Manual
modify
parameters
E
G