Angelo Po FX61 G3 Manuel D'installation Et D'opération page 67

"AUTOMATIC WASHING" MODE
Do the following;
1. Select the "automatic washing" function using
the knob.
2. Press button to confi rm selection.
The display will show
This screen is used to select the type of program
for cleaning of the appliance.
3. Check there is at least 1 liter of cleaning products
(cleaner and sanitizing agent) in each of the
respective tanks.
4. Select washing cycle required using the knob.
5. Press button to start the washing cycle.
IMPORTANT _________________________
The presence of the operator is only required for
the semi-automatic wash cycle.
Semiautomatic washing
Do the following;
1. Select the wash cycle of interest using the
knob.
2. Press the button to start the wash cycle.
>>>
>>>
>>>
Washing
programs
>>>
>>>
>>>
>>>
Combination Oven Installation and Operation Manual
Section 5
Operation
automatic cleaning
standard cleaning
medium cleaning
basic cleaning
soft cleaning
De-scaling
semi-automatic washing
TMC long rinse cycle
short splash rinse cycle
enable water
enable ECO
drain cleaning
standard cleaning
Semiautomatic washing
Time
142 min
95 min
70 min
30 min
34 min
24 min
12 min
3 min
67