Angelo Po FX61 G3 Manuel D'installation Et D'opération page 69

IMPORTANT _________________________
Only for the "Standard clean" and "medium
clean" washing programs it is possible to
use the "enable/disable drain washing"
function using the button.
IMPORTANT _________________________
For all cleaning programs except for "TMC
long rinse cycle" and "short splash rinse
cycle" it is possible to "enable/disable
ECO" using the button.
Note: The "enable ECO" function is used to
eliminate the drying/fi nal sanitization
phase from the various cleaning programs
resulting in energy savings.
6. When the appliance washing cycle is completed,
a beeper sounds and this screen appears on the
display.
7. Press button to switch off the buzzer.
8. The cleaning cycle interruption alarm appears if
the cleaning cycle is stopped (due to an alarm
or it is voluntarily stopped with the START/STOP
button).
9. Press the"RESET" button.
>>>
>>>
>>>
>>>
>>>
>>>
Combination Oven Installation and Operation Manual
Section 5
Operation
enable drain
washing
enable ECO
69