Angelo Po FX61 G3 Manuel D'installation Et D'opération page 70

Section 5
Operation
10. Press the "emergency rinse cycle" button and
wait for the cleaning cycle to end.
11. Press the button to return to the previous page.
COOKING CYCLE START AND END
PROCEDURE
To start a cooking cycle (in manual or programmed
mode), do the following;
1. Switch on the appliance (see page 28).
2. Select the cooking type and set all the values
necessary for correct operation (see page 40).
3. Press the button.
If the page appears on the display, the preheating
function is on. Wait for the preheating stage to
be completed before placing the foods inside the
cooking chamber.
At the end of the preheating stage, the display
will show page.
70 Combination Oven Installation and Operation Manual
>>>
>>>
>>>
Cooking chamber
temperature
>>>
Preheating temperature
rinse in
emergency
Time