Angelo Po FX61 G3 Manuel D'installation Et D'opération page 71

If preheating has to be ended prematurely, press
the button.
If you need to
temperature, press the button and proceed as
indicated on page 40.
4. Place the foods for cooking inside the cooking
chamber and close the door to start the cooking
cycle.
The display will show this screen.
IMPORTANT _________________________
The light inside the cooking chamber
remains on throughout the cycle to allow
the food to be viewed.
When the burner is lit, the specifi c icon is
illuminated on the display.
5. To feed steam into the chamber while cooking is
in progress, press the button.
6. Use the knob to set the steam injection time
from 1 to 59 seconds. The setting is retained for
the next cooking processes.
This function is active only if the "Multi-cooking"
function has not been activated. Otherwise it
will display the times of the "Multi-cooking"
function".
>>>
change the pre-heating
>>>
>>>
>>>
>>>
manual cooking
Cooking temp
Burner lit icon
Fan speed
Cooking time/"Core"
temperature
ECO/PLUS
Percentage humidity or steam
vent percentage
Combination Oven Installation and Operation Manual
Section 5
Operation
end preheating
modify
temperature
Time
time left
modify steam display
temperature injection measured data
steam
injection
display
measured data
71