Led Status Display - Alfa Laval TopControl Basic Manuel D'utilisation

11.5. led status display
The LED status display indicates the bus status (LED green and red).
Figure 31: LED status display AS Interface
led green led red
off off
off on
on off
flashing on
off flashing
Table 24: LED Status Display AS Interface
Figure 32: Position of the seal in the body casing
→
Check that the seal is correctly positioned in the body casing.
noTe!
damage or malfunction due to penetration of dirt and humidity!
• To observe protection class IP65 / IP67, screw the transparent cap in all the way.
→
Close the device (assembly tool: 674077
The assembly tool (674077) is available from your Bürkert sales office.
19)
50
POWER OFF
No data traffic (expired Watch Dog at slave address does not equal 0)
OK
Slave address equals 0
Sensor supply overloaded or external reset
).
19)
English
Bus LED green
Bus LED red
Body casing
Seal
body casing
Type 8694
AS-Interface installation