Control And Display Elements; Operating Status; Control And Display Elements Of The Positioner - Alfa Laval TopControl Basic Manuel D'utilisation

7. cOnTrOl and display elemenTs
The following chapter describes the operating statuses as well as the control and display elements of the positioner.
Further information on the operation of the positioner can be found in the chapter entitled "12. Start-up".
7.1. Operating status
autOmatic (autO)
Normal controller mode is implemented and monitored in AUTOMATIC operating status.
→ LED 1 flashes green.
manual
In MANUAL operating status the valve can be opened and closed manually via the keys.
→ LED 1 flashes red / green alternately.
DIP switch 4 can be used to switch between the two operating statuses AUTOMATIC and MANUAL.
On
1 2 3 4
7.2. control and display elements of the positioner
Version 1
LED 1
Figure 8: Description of control elements
24
dip
LED 2
English
Version 2
Key 1
LED 1
Key 2
LED 2
DIP Switches
Communications
interface
Key 1
Key 2
Type 8694

Control and display elements

Communications
interface
ON DIP
1 2 3 4