Accessories; Communications Software (Pc Software Based On Fdt/Dtm Technology); Pactware 3.6; Usb Interface - Alfa Laval TopControl Basic Manuel D'utilisation

Type 8694

Accessories

16. accessOries
designation
USB adapter for connection to a PC in conjunction with an extension cable
Communications software based on FDT/DTM technology
(Information see chapter entitled "16.1. Communications software (PC
SOFTWARE based on FDT/DTM technology)")
Connection cable M12 x 1, 8-pole
Assembly tool
Table 34: Accessories
16.1. communications software (pc sOfTWare based
on fdT/dTm technology)
The communications software consists of the Bürkert DTM devices (configuration and parameterization software)
and an associated frame application, e.g. PACTware 3.6.
The DTMs can only run in conjunction with an FDT frame application such as PACTware.
The PC operating program is designed for communication with the devices from the Bürkert positioner family
(basic models without display).
A detailed description and precise schedule of the procedure for the installation and operation of the
software can be found in the associated documentation.
16.1.1. pacTware 3.6
Frame program of the PACTware Consortium e. V. for the recording and operation of FDT 1.2 or FDT 1.2.1 com-
pliant DTMs of any manufacturers.
Microsoft .NET Framework 1.1 + .NET Framework 1.1 SP1 must be installed.
16.1.2. usB interface
The PC requires an USB interface for communication with the positioners as well as an additional adapter with
interface driver (see "Table 34: Accessories").
The data transfer must be according to HART specification; the HART communications DTM, also installed during
the installation of PACTware, can be used for this.

16.1.3. download

Download the software (DTM and PACTware) at:
The latest version of the communications software is always available by means of the download function.
www.burkert.com or www.pactware.com
Order no.
227093
Information at www.buerkert.de
919061
647077
English
63