Auxiliary Functions - Alfa Laval TopControl Basic Manuel D'utilisation

Type 8694
Operation and function
13.2. auxiliary functions
The following additional functions can be configured and parameterized via the communications software:
function
DIR.ACTUATOR
SPLITRANGE
X.LIMIT
X.TIME
X.CONTROL
SAFE POSITION
SIGNAL ERROR
BINARY INPUT
OUTPUT
Table 32:

Auxiliary functions

The operating instructions for the communications software describe in detail the individual functions, as
well as parameterization and configuration.
These instructions can be found on the Internet at
can be ordered by quoting identification number 804625.
description
Assignment of the aeration status of the actuator chamber to the actual position
Signal split range; input signal as a % for which the valve runs through the entire
stroke range.
Limit the mechanical stroke range
Limit the control speed
Parameterize the position controller
Input the safety position
Configuration of signal level fault detection
Activation of the binary input
Configuration of the outputs (only with auxiliary board for analogue feedback signal
or binary outputs)
www.alfalaval.com and are also available on CD which
English
59