Batch; Enable Batch; Programming Batch - Burkert SE 56 Manuel D'instructions

ENABLE BATCH

Enable one of the following functions to enable and program the batch on the transmitter:
POS. 5.9-5.10: START/STOP batch from input
POS. 6.1-6.2: assign one of the functions to one of the two outputs
Some examples of operation of such functions are visualized at page 11 and following.
VISUALIZATION PAGE WITH BATCH FUNCTION ENABLE
From the visualization pages
BATCH FUNCTION
Input key code
Choose the formula number for associate
quantity batch (between 00 and 15)
Input quantity product for each batch
Input product name for batch (max 8 characters.)
Input maximum time for batch
If timer = 0, safety timer disabled;
max timer set = 6000 sec.
N.B. if the function "batch alarm" is assigned to
an output, the output is activated as soon as the
timer has elapsed, except if the batch is
interrupted.
35
Programming formula n°
product Name
Batch in progress
Visualizations:
1) batch off: n° batch effected
2) batch on: decrease safety timer
3) programming: programming safety timer
indefinite if timer=0 timer disabled
Programming batch quantity
Visualization batched product

PROGRAMMING BATCH

For each formula you can
associate:
Product quantity
Product name
Maximum time for
batch (safety time for
each formula)
After activating the batch
function from any
visualization page at page
17, proceed as in the
opposite example.
SE 56