Burkert SE 56 Manuel D'instructions page 21

Some of the most used functions can be accessed directly using the "Quick start menu"
by pressing the "ENTER" key. The Quick start menu can be disabled by the function 8.6
in the display menu: if the Quick start menu is disabled, pressing the "ENTER" key gives
access to the main menu.
QUICK START MENU FUNCTIONS
The above functions "batching setup", "regulation setup" and "flow measure setup"
instantaneously configures the device by modifying in optimal way all the parameters
referring to the chosen operation. To enable one of the 3 operations select the function
using key "ENTER", then validate the "EXECUTE?" request by having a long press on
key "ENTER".
MENU
Functions described at page 20 and
following (menus "2-Scales", "3-
Measure", "1-Sensor", "10-Diagnostic"
and "7-Communication")
Automatic optimization of the parameters
(see below)
Access to all functions
20
SE 56