Installation Option 1 - Open Enclosure (Enclosure Stops Short Of The Ceiling) - Napoleon Luxuria Serie Manuel D'installation

Masquer les pouces Voir aussi pour Luxuria Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4.1

installation option 1 - open enclosure (enclosure stops short of the ceiling)

NOT Suitable for Dynamic Heat Control™ Plus
It is one option not to fi nish or close in the top of the enclosure to provide the necessary air circulation path for
the Dynamic Heat Control™ system. Leaving a complete air outlet opening above the enclosure has been
found to be well accepted with respect to fi nal appearance and offer minimal distraction. It also allows for effi cient
circulation of air within the room. This option offers the simplest method for framing and installation. (If installing
Dynamic Heat Control™ Plus, refer to option 2 or 3 - DHC™ Plus cannot be used with option 1). Limit
the air outlet opening height to 4" to reduce the risk of items inadvertly falling into the enclosure. The air outlet
opening must extend around the entire perimeter, or the entire front face of the enclosure, where the
enclosure runs from wall to wall.
DYNAMIC HEAT
CONTROL™ AIR
OUTLET OPEN-
ING IS HOT WHEN
APPLIANCE IS
OPERATING!
Air outlet opening
must be located out of reach of
the user. Air outlet must not be
restricted by furnishings or decor.
6" min
Wall mounted
object (picture
frame, appliance,
etc.)
2-4"
installation planning
ceiling
RECOMMENDED
W415-2035 / C / 04.30.21
EN
29

Publicité

Chapitres

Table des Matières
loading

Table des Matières