Control Module Removal - Napoleon Luxuria Serie Manuel D'installation

Masquer les pouces Voir aussi pour Luxuria Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

D.
Disconnect the fl ex connector from the valve. Remove the valve wire connections, labeling each one to
aid with re-connection.
E.
Remove the screws from the valve bracket and remove the valve.
F.
Replace all components before returning the appliance to service.
G.
Check for gas leaks by brushing on a soap and water solution.

14.5 control module removal

A.
Remove the GGA-1 and glass door, refer to the "glass guard installation / removal" & "door installation /
removal" sections for details.
B.
Remove the control cover from the appliance by sliding it up and out of the clips of the front cover.
C.
Remove the two screws holding the control module in place, unplug and remove.
D.
Ensure to identify the wires plugged into the control module. It is critical that wires are reconnected to
the appropriate connectors.
E.
Replace and reinstall components.
CONTROL MODULE
maintenance
83
W415-2035 / C / 04.30.21
EN

Publicité

Chapitres

Table des Matières
loading

Table des Matières