Publicité
Les langues disponibles
Les langues disponibles
Installation Option 2 - Front opening
Minimum air outlet opening dimensions must be
followed. The opening is required to be framed no
more than 1.5" below the enclosure top to avoid
trapping heat in the upper areas and the air outlet
opening centered on the appliance center. Framing
the air outlet opening lower will overheat the
appliance, the enclosure, and finishing material.
Installation Option 3 - Rear opening
WARNING
!
•
When using a rear air outlet opening, it is critical that the adjoining room or living spaces are in direct air
communication (i.e. of an open plan configuration or connected by a permanently open doorway or arch-
way). This prevents the appliance from being in a negative pressure more than that of the adjoining room.
Failure to follow these requirements can result in reversing the Dynamic Heat Control™ air flow and will
cause the appliance, safety barrier, and finishing materials to overheat, creating a fire hazard.
Minimum air outlet opening dimension must be
followed. The opening is required to be framed no
more than 1.5" below the enclosure top to avoid
trapping heat in the upper areas and centered on the
appliance center. Framing the rear opening lower
will overheat the appliance, the enclosure, and
finishing material.
Dynamic Heat Control™ rear air outlet opening
must be located out of reach of the user. Opening
must not be restricted by furnishings or decor.
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada
2 1/2"
min
3-3 1/2"
Access
Side of
fireplace
6" min
Wall mounted
object (picture
frame, appli-
ance, etc.)
Access
Side of
fireplace
enclosure top
must be installed
• 1(866)820-8686
ceiling
0-1.5" Max
enclosure top
must be installed
ALTERNATIVE
ceiling
0-1.5" Max
ALTERNATIVE
W415-1740 / C / 11.02.17
• www.napoleon replaces.com
2 1/2"
Other
min
room
3-3 1/2"
2-3"
6" min
Wall mounted
object (picture
frame, appli-
ance, etc.)
Publicité
