Napoleon Luxuria Serie Manuel D'installation page 57

see-thru fl ush
Q
Drywall
Insulation
minimum framing
Ref LVX38-1
K
E**
F 53 13/16" (136.7cm)
J
L
Q*
(Q x R)*
* ONLY APPLICABLE TO OPTION 2 AND 3 - Opening must be centered in enclosure on appliance. Dimensions represent
fi nished sizes and where applicable should be adjusted to include fi nish material thickness.
**Max. 21" (53.5cm).
fi nish framing - after appliance installation
Ceiling
R
K
E
F
LVX50-1
39 15/16" (101.4cm)
16 3/16" (41.1cm)
65 13/16" (167.2cm)
Optional - Appliance does not need to be elevated above fl oor
73" (185.4cm)
2" min and 3" max
80 sq. in.
note:
Finish framing must be built after
appliance has been placed in its
fi nal position and venting
connected.
The LVX series requires a mini-
mum enclosure height, as illus-
trated (dimension L), measured
from the bottom of the appliance.
For temperature requirements,
this area must be left unobstruct-
ed. Some venting confi gurations
that require more vertical rise
will require a larger enclosure to
L
provide minimum vertical clear-
ance between vent pipes and
combustibles.
Option 2 illustrated (appliance not
shown)
J
LVX62-1
77 13/16" (197.6cm)
91" (231.1cm)
160 sq. in.
EN
LVX74-1
89 13/16" (228.1cm)
57
W415-2035 / C / 04.30.21