Led Replacement - Napoleon Luxuria Serie Manuel D'installation

maintenance
EN

14.6 LED replacement

This appliance comes equipped with an LED strip. If in the event the LED strip needs to be replaced, follow
these instructions.
A.
Turn off all electrical supply.
B.
Remove the GGA-1 and glass door, refer to the "Glass Guard installation/removal" & "door installation/
removal" sections for details.
C.
Remove the control cover from the appliance by sliding it up and out of the clips of the front cover.
D.
Remove the media tray and burner assembly, refer to the "burner removal" section for details.
E.
Unplug the LED strip from the control module.
F.
Remove the LED glass by removing the screws securing the LED frame in place, then lift it up and out
of the appliance.
G.
Remove the LED strip by removing the four securing screws, replace and reinstall components.
84
W415-2035 / C / 04.30.21
LED FRAME
LED GLASS
LED GASKET
LED STRIP
LVX38-1 Illustrated