Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
Dynamic Linear Trim (DLT) Installation Instructions
WARNING
!
•
Do not touch safety screen or glass guard assembly until cooled.
•
Allow safety screen or glass guard assembly to cool completely before any maintenance, as it will remain hot after
appliance is no longer operating.
•
Ensure the appliance is completely cool before starting installation.
•
To avoid danger of suffocation keep the packaging bag away from babies and children. Do not use in cribs, bed,
carriages, or play pens. This bag is not a toy. Knot before throwing away.
Installer: Leave this leaflet with the appliance. Consumer: Retain this leaflet for future reference.
Caution: A barrier designed to reduce the risk of burns from the hot viewing glass is provided with the appliance and shall be
For use with all models equipped with Dynamic Heat Control™. Refer to your installation manual for all
You will need:
Included in DLTM:
Dynamic Linear Trim Medium
1. Insert Dynamic Linear Trim (DLT) into the rough opening.
2. Secure DLT using screws (supplied). Take care not to overtighten the mounting screws and distort or damage trim during
installation.
3. The trim comes pre-primed and can be painted to suit the decor using a suitable paint.
note:
It is recommended to use high temperature construction adhesive to secure the Dynamic Linear
Trim. If desired, the provided screws can be removed after the adhesive has fully cured.
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada
installed. This barrier is not designed for prolonged contact.
information relating your specific appliance.
Gloves
4 x Screws
Drill
Included in DLTL:
Dynamic Linear Trim Large
DLTM illustrated
DLTL illustrated
• 1(866)820-8686
Phillips Bit
6 x Screw
Side view
W415-1740 / C / 11.02.17
• www.napoleon replaces.com
Publicité
Manuels Connexes pour Napoleon Luxuria 38
Sommaire des Matières pour Napoleon Luxuria 38
- Page 1 Trim. If desired, the provided screws can be removed after the adhesive has fully cured. DLTM illustrated DLTL illustrated Side view W415-1740 / C / 11.02.17 Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada • 1(866)820-8686 • www.napoleon replaces.com...
- Page 2 W415-1740 / C / 11.02.17 Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada • 1(866)820-8686 • www.napoleon replaces.com...
- Page 3 DLTM 39 5/8” (100.6cm) 3” (7.6cm) 1 1/2” (3.8cm) 63 5/8” (161.6cm) 3 1/2” (8.9cm) 1 1/2” (3.8cm) DLTL W415-1740 / C / 11.02.17 Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada • 1(866)820-8686 • www.napoleon replaces.com...
-
Page 4: Installation Option 2 - Front Opening
Opening object (picture frame, appli- must not be restricted by furnishings or decor. ance, etc.) ALTERNATIVE W415-1740 / C / 11.02.17 Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada • 1(866)820-8686 • www.napoleon replaces.com... - Page 5 DLT. Si désiré, les vis fournies peuvent être enlever après l’adhésif à sécher complètement. DLTM illustré DLTL illustré Vue du côté W415-1740 / C / 11.02.17 Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada • 1(866)820-8686 • www.napoleon replaces.com...
- Page 6 W415-1740 / C / 11.02.17 Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada • 1(866)820-8686 • www.napoleon replaces.com...
- Page 7 DLTM 39 5/8” (100,6cm) 3” (7,6cm) 1 1/2” (3,8cm) 63 5/8” (161,6cm) 3 1/2” (8,9cm) 1 1/2” (3,8cm) DLTL W415-1740 / C / 11.02.17 Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada • 1(866)820-8686 • www.napoleon replaces.com...
- Page 8 L’ouverture de sortie d’air ne doit pas être obstruée ALTERNATIVE par le mobilier ou la décoration. W415-1740 / C / 11.02.17 Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada • 1(866)820-8686 • www.napoleon replaces.com...