Operation; Mode Of Operation; Dust/Chip Extraction - Meister MSB750-1 Traduction Du Manuel D'utilisation Original

Rotate it clockwise to drill holes and to
use the impact drilling function.
Use anti-clockwise rotation to release
jammed drills.
Selector switch for drilling/hammer
drilling
The respective mode is selected by slid-
ing the switch (1) at standstill of power
tool (Fig. 5).
• D rill symbol visible:
Mode for „drilling" wood and metal
• H ammer symbol visible:
Mode for „hammer drilling" concrete
and masonry.
8 – Operation
Switching on and off
Insert the power plug into a suitable
s ocket.
The operating display (5) lights up (Fig.
6) and indicates contact with the power
supply. It goes off when the plug is
detached.
CAUTION! Always switch the
machine on before making con-
tact with material.
Switching on
Press the On/Off switch (6) carefully, the
machine starts, the rotation speed var-
ies according to the pressure exerted on
the switch.
Switching off
Release the on/off switch (6) and wait
until the device has stopped completely.
5452220-Schlagbohrmaschine_man.indd 47 5452220-Schlagbohrmaschine_man.indd 47
Switching on continuous operation
Press and hold the on/off switch (6).
Press the off trigger (3) (Fig. 4). Release
the on/off switch (6) – the device will run
at the set speed.
Switching off continuous operation
Press the on/off switch (6) to unlock the
off trigger (3). Release the on/off switch
(6) and wait until the device has stopped
completely.
9 – Mode of operation
Drilling in wood and metal
Turn the Drilling/Impact Drilling selector
switch to "Drilling"
the clockwise/anti-clockwise switch to
„clockwise" rotation. Activate the elec-
tronic revolution regulation by pressing
the on/off switch. Set the revolution
selection using the adjusting wheel on
the on/off switch.
Hammer drilling in concrete and
masonry
Turn the Drilling/Impact Drilling selector
switch to "Impact Drilling" mode
Set the clockwise/anti-clockwise
switch to „clockwise" rotation. Screwing
and removing screws.

Dust/chip extraction

Dust from materials such as lead-based
paint, and some types of wood, miner-
als and metals can be harmful to health.
Touching or inhaling this dust may
cause the device operator, or personnel
in the vicinity, to develop allergic reac-
tions and/or respiratory illnesses.
mode. Set
.
47
17.07.20 06:49 17.07.20 06:49