Technical Data - SOMFY J4 io Notice Installateur Et Utilisateur

10. TECHNICAL DATA

Radio frequency
Frequency bands and maximum power
used
Power supply
Operating temperature
Protection rating (J4 io motor)
Protection rating (J4 io plate)
Maximum number of associated control
points and sensors
Maximum end of travel cage capacity
(in turns)
Factory set end of travel cage capacity
(in turns)
Safety level (J4 io motor)
Safety level (J4 io plate)
Torque (Nm)
Motor length (mm)
Acoustic power level
For the J418, the maximum permissible torque for an end of the motor shaft is 12 Nm.
Thermal time
J4 io motors are protected by a thermal cut-out in case of overheating caused by continuous use for
longer than 6 minutes.
82
868-870 MHz io-homecontrol®, two-way Tri-band
868,000 MHz - 868.600 MHz e.r.p. <25 mW
868,700 MHz - 869.200 MHz e.r.p. <25 mW
869,700 MHz - 870.000 MHz e.r.p. <25 mW
230 V ~ 50 Hz
- 20°C to + 60°C
IP 54
IP 67
200
120
Class I
Category II
6 10
306 321
LpA ≤ 70 dB(A)
© 2014-2016 Somfy SAS. All rights reserved.
9
18
341