J4 Io Plate - SOMFY J4 io Notice Installateur Et Utilisateur

4.5 67 x 66 mm head rail, open below
• Screw the 2 adaptors (1) using 2 M3 x 8 bolts (2) on the
motor shaft.
Tightening torque = 1,35 N.m +/- 20%
Ensure that the J4 io plate cable does not pass over
a rotating part of the motor or mechanism.
• Fit the two head rail adaptors (8) on the motor.
• Insert the motor into the head rail (4).
• Using the clips (5), attach the motor in the head rail (4).
•

4.6 J4 io Plate

© 2014-2016 Somfy SAS. All rights reserved.
2
7
191 mm
1
7
8
5
8
4
5
1
2
7
7
71