SOMFY J4 io Notice Installateur Et Utilisateur page 69

4.4 78 x 67 mm head rail, open below
Installation with J406/J410 motors
(torque of 6 or 10 Nm)
• Screw the 2 adaptors (1) using 2 M3 x 8 bolts (2) on the
motor shaft.
Tightening torque = 1,35 N.m +/- 20%
Ensure that the J4 io plate cable does not pass over
a rotating part of the motor or mechanism.
• Fit the two head rail adaptors (8) on the motor.
• Insert the motor into the head rail (4).
• Using the clip (5), attach the motor in the head rail (4).
• The shaft can be fitted into the adapter using a headless
screw (7).
Tightening torque = 2 N.m maximum
© 2014-2016 Somfy SAS. All rights reserved.
2
1
7
8
5
5
5
4
7
1
2
7
7
8
69