Compatibility - SOMFY J4 io Notice Installateur Et Utilisateur

Cutaway diagram of the head rail
For detailed technical information, refer to the specifications sheets and dedicated interface plans.
WT
Installation with the mushroom extension kit ref : 9017754
Check that during operation, none of the slats from the blind exert any radial pressure on the
mushroom.
If the EVB is equipped with a z-shaped slat, it will be necessary to adjust the upper end limit for
the motor. In this case, the mushroom is used to ensure the safety of the EVB.
Motor tilt
The J4 io motor has been designed to operate horizontally:
NOK
3. COMPATIBILITE
The J4 io actuator is factory set to operate with a blind with normal kinematics. However, the user can
choose between blind operation modes, either with normal kinematics or kinematics with working position.
Normal kinematics: When the blind is lowered, the slats are closed.
Working position kinematics : When the blind is lowered, the slats are tilted to a specific angle until
the operating position. This angle is obtained either by a specific blind mechanism or by tilters.
66
20 mini
OK
© 2014-2016 Somfy SAS. All rights reserved.
36 mini
OK 10°
max