Installation; Open Below - SOMFY J4 io Notice Installateur Et Utilisateur

4. INSTALLATION

4.1 57 X 51 mm or 58 x 56 mm head rail, open below
• Screw the 2 adaptors (1) using 2 M3x8 bolts (2) on the
motor shaft.
Tightening torque = 1,35 N.m +/- 20%
Ensure that the J4 io plate cable does not pass over
a rotating part of the motor or mechanism.
• If necessary, compress the edge of the head rail (4) into
the motor zone.
• Insert the motor into the head rail (4).
• Using the clips (5), attach the motor in the head rail (4)
above the acoustic tapes (6a).
• The shaft can be fitted into the adapter using a headless
screw (7).
Tightening torque = 2 N.m maximum
4.2 58 x 56 mm head rail, open above
Installation with external clips
• Screw the 2 adaptors (1) using 2 M3x8 bolts (2) on the
motor shaft.
Tightening torque = 1,35 N.m +/- 20%
Ensure that the J4 io plate cable does not pass over
a rotating part of the motor or mechanism.
• Insert the motor into the head rail (4).
• Using the clips (5), attach the motor in the head rail (4)
above the acoustic tapes (6a).
• The shaft can be fitted into the adapter using a
headless screw (7).
Tightening torque = 2 N.m maximum
© 2014-2016 Somfy SAS. All rights reserved.
5
7
2
1
6a
4
5
7
5
7
2
1
6a
7
5
7
2
1
7
4
7
2
1
7
4
67