Adjusting The Spray Gun; Choice Of Spraying Effects; Adjusting The Required Spray Effect; Adjusting The Amount Of Material - WAGNER W 850 E Mode D'emploi

A
+
-
1
50
B C
3 1
8

Adjusting the spray gun

Choice of spraying effects

A = vertical flat jet
for horizontal surfaces
B = horizontal flat jet
for vertical surfaces
C = round jet
for corners and edges and other
badly accessible places.
9

Adjusting the required spray effect

With the union nut (3) loosened: turn
air cap (1) to the required spray
effect position.
Caution:
Never open trigger when making
adjustments on the air cap.
10

Adjusting the amount of material

Adjust the amount of material by
turning the adjustment screw.
+ turn to the right – more material
– turn to the left – less material
Adjusting the amount of air and
pressure
The amount of air and pressure can
11 be adjusted to the perfect setting for
the particular coating material.
Turn adjusting knob (1) to the right
(clockwise) to increase the amount
of air and pressure.
Turn adjusting knob (1) to the left
(anti-clockwise) to decrease the
amount of air and pressure.
GB