Adjusting The Desired Spray Setting; Adjusting The Material Volume (Fig. 6); Spray Technique - WAGNER STUDIO HOME DECOR SPRAYER Mode D'emploi

GB

9. Adjusting the desired Spray Setting

WARNING! Danger of injury! Never pull the trigger guard while adjusting
the air cap.
With the union nut (fig. 4, 1) slightly unscrewed, turn the air cap (2) to the desired
spraysetting position (arrow). Then tighten the union nut.
Fig. 5 A = vertical flat jet
Fig. 5 B = horizontal flat jet 
Fig. 5 C = circular jet

10. Adjusting the Material Volume (Fig. 6)

Adjust the material volume by rotating the regulator on the back of the gun. There is a
scale on the regulator for guidance (I to IIII).
+ turn to the left
- turn to the right

11. Spray Technique

•
The spray result depends heavily on the smoothness and cleanliness of the surface to
be sprayed. Therefore the surface should be carefully prepared and kept free of dust.
•
Cover all surfaces not to be sprayed.
•
Cover screw threads or similar parts of the target object.
•
It is advisable to test the spray gun on cardboard or a similar surface to find the
correct setting.
Important: Begin spraying outside of the target area and avoid interruptions inside
the target area.
The spray movement should come from the arm, not just from the wrist. This ensures
that a uniform distance is maintained between the spray gun and the spray surface
during the spray operation. Select a distance of 5 - 15 cm, depending on the desired
spray jet width.
Fig. 7 a: CORRECT Even distance to the object.
Fig. 7 b: INCORRECT Uneven distance causes uneven coating.
•
Move the spray gun evenly cross-wise or up-and-down, depending on the spray
pattern setting.
•
An even movement of the spray gun results in an even surface quality.
•
When coating material builds up on the nozzle and air cap, clean both parts with a
solvent or water.
For inspiration and useful tips, visit
i
20
for horizontal surfaces

for vertical surfaces
for corners, edges and hard-to-reach surfaces

higher material volume

lower material volume

Studio Home Decor Sprayer